FWS

4

ZFGFS19933

FLEETGUARD

The Fleetguard FS19933 is a spin-on fuel/water separator built on cellulose media with a 1-14 UNF-2B threaded mount and no internal standpipe. The 207.98 mm body, 108.20 mm OD and 99.95 / 90.55 mm gasket footprint support 5.67 L/min rated flow with 98.7% efficiency at 10.1 microns, 95% emulsified water separation and a 2068.50 kPa hydrostatic burst minimum, tested to CECO ES14225. This is the drain-only variant without a Water-In-Fuel sensor port, replacing Fleetguard FS19798.